I am having issues with some 24v floods on an Enttec Octo.
Unfortunately, I'm replacing existing puck lights and am not in control of the wiring as I need to use what's there.
I have 16 24v 10w floods off a single port.
I am getting the occasional flicker, maybe every 30 seconds, they flash then resume as expected.
At first there was crazy flickering but I added some fAmps which really helped
Flickering starts at the 3rd flood.
The power supply is big enough to power them but the power is only at the start of the string.
It really seems like a data issue. If I were to wire this, I would use multiple ports but that's not an option.
Any thoughts on what else to try?
Phil Spitler