S-Play (70092)

Record, Edit and Playback up to 32 Universes using Art-Net/sACN or 2 Universes using the two built in DMX ports with an all in one show recorder.

Configuring a micro SD card for the S-Play
The S-Play references the first partition of an SD card only. For the best experience, ENTTEC recommends removing all content from your SD card and crea...
Fri, 11 Aug, 2023 at 4:05 AM
TypeError: Load Failed
A customer experienced this error message whilst using Safari. I recommend trying on a different browser to see if the page loads correctly. 
Thu, 2 Mar, 2023 at 9:08 AM
DALI & DALI2 system
ENTTEC recommends the use of DALI-certified devices only. There are several options to integrate an S-Play with a DALI / DALI2 system using 3rd party hardw...
Fri, 8 Apr, 2022 at 8:09 AM
Fatal Engine Error
A ‘Fatal Engine Error’ is shown on the LCD when the S-Play’s engine cannot run or boot as intended. In some scenarios, this can be observed after resett...
Fri, 8 Apr, 2022 at 8:10 AM
System Specification
The S-Play allows a maximum number of entities. These are as follows: Type Maximum Quantity Cue Library 256 Events Unlimited Triggers ...
Fri, 8 Apr, 2022 at 8:16 AM
S-Play API
Alongside defining Triggers in the web interface. It's possible to control the S-PLAY using its API for instant control of your S-Play.  S-Play OSC ...
Tue, 3 May, 2022 at 7:34 AM
USB Restore
To load an S-Play backup via USB, you must rename your backup file to ‘splay_backup.bak’ for it to be accepted. Alternatively, you may wish to use the r...
Fri, 8 Apr, 2022 at 8:16 AM
Working with Audio
The S-Play doesn’t feature native audio playback functionality; however, thanks to its broad I/O integration options, it can be used to trigger several play...
Fri, 8 Apr, 2022 at 8:17 AM
S-Play Recording - Best Practices:
Best practices for recording a Dynamic cue: Device Activity: When entering the Cue Library, Events, Triggers, the Stop All command is used in the backgrou...
Thu, 15 Sep, 2022 at 11:04 AM
When sending UDP or RS232 how do I send a Carriage Return or Line Feed?
RS232 and UDP strings ending in \r a carriage return will replace the \r. RS232 and UDP strings ending in \n a line feed will replace the \n.
Fri, 16 Sep, 2022 at 7:04 AM