Pixel: General Knowledge
A traditional LEDs (Light Emitting Diodes) recieve power and output light. Typically, these are packaged in groups of three or four coloured LED emitters (R...
Wed, 5 Apr, 2023 at 9:45 AM
Firstly, you'll require a Constant Voltage (CV) power supply to work with your pixels. Several professional power supplies give the option to switch bet...
Tue, 4 Apr, 2023 at 12:01 PM
Flicker/Erratic behaviour Voltage Drop: When there is not enough power running through the pixels to adequately power them. As the voltage travels down th...
Thu, 17 Aug, 2023 at 7:26 AM
The short answer is no. The PWM (Pulse Width Modulation) refresh rate for all pixel ICs is part of the chip’s design and, therefore, cannot be altered (...
Fri, 4 Aug, 2023 at 10:22 AM
Pixel Strip (or Pixel Tape as it’s sometimes called) is a flexible circuit board that’s populated with multi-coloured, addressable surface mounted (SMD) lig...
Tue, 4 Apr, 2023 at 11:04 AM
When undertaking an installation involving ENTTEC products, ENTTEC strongly recommends the following guidelines are adhered to. Key Electrical Safety ...
Tue, 28 Mar, 2023 at 11:14 AM