eDMX (Art-Net / sACN) & Networking
For the most reliable installation, it’s recommended to use a wired connection where possible (i.e. using a Lightning-to-Ethernet Adaptor); however, if cont...
Tue, 10 Jan, 2023 at 5:56 PM
We’ve listed just some of the software compatible with ENTTEC hardware below: Note that this list is not exhaustive; there are many other options availa...
Tue, 5 Apr, 2022 at 9:21 AM
This guide requires you to have administrator privileges on the computer. If you do not, you’ll need to sign into an account that does or talk to you networ...
Thu, 7 Apr, 2022 at 12:02 PM
When the signal is lost on an ENTTEC DMX device the last value is held until either the signal returns or the device is power cycled. If the device sup...
Wed, 18 May, 2022 at 9:11 AM
This guide requires you to have administrator privileges on the computer. If you do not, you’ll need to sign into an account that does or talk to you networ...
Fri, 8 Apr, 2022 at 6:44 AM
What is Art-Net? Art-Net is essentially DMX over IP (DMX over a network). However, unlike DMX, you can send thousands of DMX universes over one cable at on...
Thu, 7 Apr, 2022 at 11:08 AM
Connecting the device's web interface allows remote configuration of the device’s settings and is a strong indicator that the device is active on the ne...
Tue, 11 Apr, 2023 at 11:18 AM
IGMP is a communications protocol used by devices and routers on IPv4 networks to establish multicast group memberships. IGMP is an integral part of IP mult...
Fri, 8 Apr, 2022 at 7:06 AM
Most PLC’s have the ability to send ArtNet or sACN packets, however, they aren’t necessarily designed for sending constant streams of data with 1000’s of di...
Thu, 15 Sep, 2022 at 9:18 AM
ENTTEC products do not support IPv6, however, they do support IPv4, which can be output Art-Net and sACN data from the GrandMA Dot2 console session. Pl...
Fri, 8 Apr, 2022 at 7:06 AM